BRITE BOWL CLEANER

DIRECTIONS

1) To clean toilet bowls, flush toilet and add 4 oz of product directly to the toilet bowl. Swab bowl completely using a scrub brush or toilet mop, making sure to get under the rim. Let stand 5 minutes, then flush.

2) To clean urinals, add 2 oz of product to 48 oz of water. Flush urinal and apply solution with brush or toilet mop making sure to scrub completely under the rim. Let stand 5 minutes, then flush.

3) For badly stained toilet bowls, flush toilet and use toilet mop to push water from the bowl over the trap. Press swab mop against bowl to remove excess water. Then saturate mop with 2 oz of product while holding bottle and applicator over the bowl. Swab bowl completely making sure to get under the rim. Let stand 5 minutes then flush.

DANGER

KEEP OUT OF REACH OF CHILDREN

Causes eye and skin damage. Do not get in eyes, on skin, or on clothing. Wear goggles, face shield or safety glasses and rubber gloves when handling. Harmful if swallowed. Avoid contamination of food. Wash thoroughly with soap and water after handling.

STATEMENT OF PRACTICAL TREATMENT

In case of contact, immediately flush eyes or skin with plenty of water for at least 15 minutes. For eyes; call a physician. If swallowed, drink large quantities of water. Avoid alcohol. Call a physician immediately.

STORAGE & DISPOSAL

Store in a dry place no lower in temperature than 50 degrees F or higher than 120 degrees F. Do not re-use empty container. Triple rinse container with water.